20/16 mm tan crocodile-style genuine leather strap to fit TAG Heuer Monza models listed. Please read clasp fitment details.
VERY IMPORTANT: Please read the following information before placing your order:
1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.
2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:
The clasps listed above are 16 mm wide and are designed for a strap with a maximum thickness of 2 mm where it passes through the clasp clamp. Monza re-issue models are fitted with the 18 mm FC5049 clasp, which is designed for a strap that is 3 mm thick, and as a result this strap will be too narrow as well as too thin to be gripped securely in the clasp clamp. If you require a strap for a Monza re-issue model please see here.
3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. A suitable clasp can be found here.
4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.
We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.
|Strap Section Lengths (mm)||104/84|
|Thickness at watch/at clasp (mm)||5.2/2.0|