19/18 mm black crocodile-style genuine leather deployment type strap with red stitching & lining to fit TAG Heuer Carrera models listed below - please read clasp fitment notes
We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.
VERY IMPORTANT: Please read the following information before placing your order:
1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.
2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:
3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Our clasp models PC5014 and PC5018 are suitable for use with this strap, they can be found here and here.
4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.
|Strap Section Lengths (mm)||104/84|
|Thickness at watch/at clasp (mm)||4.5/2.0|
|Model Number||CBK221B CBK221C CV2110 CV2111 CV2113 CV2115 CV2116 CV2117 WAR2110 WAR211A WAR211B WAR211C WAR215A WAR215B WAR215C WAR215D WAR215E WAR215F WAS2110 WAS2111 WAS2112 WAS2113 WAS2114 WAS2115 WAS2140 WAS2150 WAS2151 WV2115 WV2116 WV211A WV211B WV211C WV211D|