20/18 mm black crocodile-style genuine leather strap with red stitching & lining to fit TAG Heuer Carrera & Grand Carrera models listed below - please read clasp fitment notes
Colour: Black with red stitching & lining Black crocodile style leather strap with red stitching and lining to fit the following TAG Heuer Carrera & Grand Carrera models:
If you are unsure of where to find the model number of your watch or clasp, please see here. The straps are 20 mm wide at the watch end, tapering down to 18 mm at the clasp end. Lengths are 105 mm & 85 mm respectively. Thickness is approximately 6.5 mm at the watch end and 3 mm at the clasp end.
The straps are custom made of genuine leather with red leather lining.
We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.
VERY IMPORTANT: Please read the following information before placing your order:
1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.
2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:
All other TAG Heuer clasps have a lower clasp clamp height (2 mm vs 3 mm for those listed above), and this strap will not fit through their clasp clamps as a result.
3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Suitable clasps can be found here and here.
4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.