20/18 mm black sports perforated buffalo grain genuine leather deployment type strap to fit the Jack Heuer special edition Carrera models listed

In stock
Only 9 left
SKU
TH-JH5037-01-0116
£44.99 £37.49
This strap fits the following Carrera 41 mm models fitted with a 3 mm deployment clasp:

CV2119 CV211A CV211D CV211E
CV5110 CV5111

VERY IMPORTANT: Please read the following information before placing your order:

1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.

2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:

FC5037 FC5039 FC5040 FC5041 FC5045
FC5049 FC5053 FC5055 FC5065

All other TAG Heuer clasps have a lower clasp clamp height (2 mm vs 3 mm for those listed above), and this strap will not fit through their clasp clamps as a result.

3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Suitable clasps can be found under the Clasp & Buckles category.

4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.

We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.

More Information
Colour Black
Stitching Colour Black
Lining red silicone
Strap Section Lengths (mm) 105/85
Thickness at watch/at clasp (mm) 6.5/3.0
Style Sports Perforated
Clasp/Buckle Deployment
Make TAG Heuer
Model Number CV2119,CV211A,CV211D,CV211E,CV5110,CV5111