Black Buffalo Grain leather strap with silver stitching to fit TAG Heuer Kirium Gents watches listed below
Please note that these straps can ONLY be used with the deployment clasp originally fitted to a Kirium leather- or rubber strap, model number FC5000, FC5001, FC5010 or FC5018. The clasp must be transferred over from the old strap - a clasp is NOT included with the strap.
If you wish to replace your existing metal bracelet with one of our leather straps and do not wish to incur the expense of buying a genuine TH clasp, our clasp model DCLP-18/2 can be used instead, please see our clasp section for details. Although it is an 18 mm clasp the gap between the strap and clasp is quite small and not noticeable unless you look closely (or are very picky).
These straps MUST be fitted using the original pin & tube from the existing Kirium rubber- or leather strap. If the tube is left out or the incorrect pin is used, the strap may come loose or it may be damaged, and this will not be covered under warranty. If you no longer have the original pin & tube, we can supply replacements, please see our parts section - the part number is NPTS-1-KIG.
Please also note that these straps are NOT suitable for use with a pin buckle.
The straps are 21.5 mm wide at the watch end and 17 mm wide at the clasp end. Lengths are 110 mm & 85 mm respectively. The strap thickness is 5.6 mm at the watch end and 2 mm at the clasp end.
The straps are custom made of genuine buffalo grain leather with beige suede lining.
We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.
|Strap Section Lengths (mm)||110/85|
|Thickness at watch/at clasp (mm)||5.6/2.0|
|Style||Buffalo Grain leather|